ของแท้ 100% พร้อมส่งจากไทย กดสั่งซื้อได้เลยค่ะ
✅สินค้าพร้อมส่งจากไทย กดสั่งซื้อได้เลยค่ะ
Arduino GIGA R1 WiFi 🌬️
The GIGA R1 WiFi comes with a USB-C® connector for programming, communication and HID functionality, a USB-A connector for connecting devices such as USB sticks and keyboards. It features a 3.5 mm audio jack for connecting speakers, microphones etc. Dedicated camera & display connectors are located at the top of the board, which can also be connected from underneath.
With a fast dual core microcontroller (480MHz / 240MHz), 76 GPIOs, several communication buses, you can build large projects using the GIGA R1 WiFi as a base. The GIGA R1 WiFi also comes equipped with a radio module, crypto chip and an antenna.
Level-up your project ideas with the Arduino GIGA R1 WiFi. It combines the power of the STM32H7 and the Mega form factor with onboard Wi-Fi® and Bluetooth® connectivity.
GIGA R1 WiFi combines the power of the STM32H7 with the Mega form factor, as well as Wi-Fi® (802.11B/G/N) and Bluetooth® Low Energy connectivity. The STM32 microprocessor with dual core Cortex® M7 and Cortex® M4, combined with onboard memory and audio jack will easily handle tasks such as machine learning and signal processing on the edge.
Features & Benefits
* Plethora of pins and connectors including 75 digital input/output (12 with PWM capability), 14 Analogue Inputs and 2 Analogue Outputs (DAC)
* The boards power and connectivity make it ideal for many solutions including 3D printing and Audio Processing
* Murata 1DX WiFi Bluetooth Module
* Secure Element ATECC608A-MAHDA-T Module
* USB 2.0 Type A Host
* USB Peripheral USB-C
* 20 pin Arducam Camera Connector
* D1N, D0N, D1P, D0P, CKN, CKP, D68-D75 Display Connector
* DAC0, DAC1, A7 Audio Connector
* JTAG Connector
Applications
* 3D Printing
* Audio Processing
* Data Acquisition Device
* Robotics
Specifications:
* Board: Arduino® GIGA R1 WiFi
* Microcontroller: STM32H747XI dual Cortex®-M7+M4 32bit low power Arm® MCU
* Radio Module: Murata 1DX dual WiFi 802.11b/g/n 65 Mbps and Bluetooth®
* Secure Element: ATECC608A-MAHDA-T
* USB:
* USB-C: Programming Port / HID
* USB-A: Host (enable with PA_15)
* Pins:
* Digital I/O Pins: 76
* Analog input pins: 12
* DAC: 2 (DAC0/DAC1)
* PWM pins: 12
* Misc: VRT & OFF pin
* Communication:
* UART: Yes, 4x
* I2C: Yes, 3x
* SPI: Yes, 2x
* CAN: Yes (Requires an external transceiver)
* Connectors:
* Camera: I2C + D54-D67
* Display: D1N, D0N, D1P, D0P, CKN, CKP + D68-D75
* Audio Jack: DAC0, DAC1, A7
* Power:
* Circuit operating voltage: 3.3V
* Input voltage (VIN): 6-24V
* DC Current per I/O Pin: 8 mA
* Clock Speed:
* Cortex® M7: 480 MHz
* Cortex® M4: 240 MHz
* Memory: STM32H747XI (2MB Flash, 1MB RAM)
* Dimensions: 101mm x 53mm (L x W)
Package list :
1 x Arduino GIGA R1 WiFi
1 x External Antenna
✅ หากต้องการ Datasheet และออกบิลใบเสร็จทักแชทแจ้งทางร้านได้เลยค่า
Ready to ship from Thailand
🔥สินค้าพร้อมส่งค่า
ส่งของทุกวันตัดยอด 08.00 น.